Graphite heat exchanger is beside people, and there are more and more environment-friendly machinery. The environmental pollution caused by manufacturing is becoming more and more serious. The appearance of environmental protection machinery has also produced many conveniences and conveniences for our daily life. You should know that high-purity graphite has many distinctive features, especially in the cleaning area, it also plays a very important role. Graphite heat exchanger is one of the common graphite equipment at present. People must pay attention to some matters when installing it. It is very easy to be damaged due to incorrect installation. Its installation address is specified: the graphite heat exchanger should be placed on the support frame conforming to the height width ratio, and it should have a reliable balance. In addition, a drain valve shall be installed to prevent parking and safety accidents. Installation of nuts: tighten the main anchor bolts to make them clamp each other and exceed the sealing purpose. The protruding face should be taken care of in many ways. When tightening the main anchor bolt, the required tightening torque should not be exceeded, so that the excellent sealing characteristics can be repaired. When tightening the anchor bolts, they must be tightened symmetrically and gradually in several times according to the top angle. The force should be symmetrical, and it is not allowed to skew to one side to exceed the actual effect of excellent sealing. After transportation and handling, it is very easy to loosen the anchor bolts. Before installation, the machinery and equipment should be carefully adjusted.
With the rapid improvement of manufacturing level, more and more new materials have just appeared in people's manufacturing. Many raw materials have their own personality characteristics, which are used in people's manufacturing and have very reasonable practical effects. We should all know about high-purity graphite. In many machines and equipment, there are also raw materials, often its back. Graphite heat exchanger refers to the machinery and equipment for producing and processing graphite materials. Its appearance takes into account the requirements for high-purity graphite in the sales market. However, if common faults are caused, high-purity graphite will be greatly harmed. When the problem of two-phase material leakage occurs, check whether the quality of high-purity graphite is difficult. Then check whether the adhesive of graphite heat exchanger is normal, whether there is melting, embrittlement Mouldy condition occurs, and the impact force of driving will come from heat or water hammer. Solution: The product quality problem must be replaced, the adhesive must be glued again, the impact force must be balanced in the actual operation, and the drainage pipeline must be early. The rupture of high-purity graphite tube will mean that the problem of starting and stopping the feeding speed of machines and equipment is faster during the actual operation period. Solution: Ensure the stability of actual operation. The system software has a large vibration, and the raw material fluidity is not smooth, resulting in unstable operation. Solution: Adjust the balance of raw materials and system software before operation. If it is very easy to find the existing problems, it is necessary to deal with the common faults of the graphite heat exchanger and treat the problems correctly to solve them.
