Graphite heat exchanger is a kind of equipment widely used in industrial production. Its principle of use is to exchange cold and heat through graphite. The graphite heat exchanger manufacturer shall pay attention to the influence of external force on the graphite heat exchanger during operation. The shearing resistance of graphite is relatively poor. If the layers are affected by external forces, it is easy to be damaged. Therefore, more attention should be paid to external forces in daily use. If the graphite heat exchanger equipment needs to be hoisted, it must be kept stable during hoisting and the force on the equipment must be uniform. The hoisting shall be carried out when there is no wind or slight wind as far as possible, instead of accelerating, and attention shall be paid to prevent the impact caused by external forces. After the installation of the graphite heat exchanger, the corresponding piping and fastening shall be carried out. Manufacturer of graphite heat exchanger
Be careful and patient when piping. To a large extent, Z should avoid mistakes in assembly, and install a compensator at the part contacting the heat exchanger to reduce the effect of vibration. If the work is carried out to fasten the flange of the graphite heat exchanger, the relevant requirements shall be followed to avoid excessive or uneven force. This equipment can be widely used in highly corrosive solutions and organic matter, and is suitable for making various heat exchange equipment. The coefficient of thermal expansion of graphite heat exchanger is relatively small, and the surface is not easy to form dirt. The performance is very good, which is the first choice for many enterprises.
